a2A1920-51gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX392 CMOS | |
| Szenzor méret | 7.77 mm | |
| Felbontás | 2.3 MP | |
| FPS (intervallumok) | 51 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A1920-51gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX392 CMOS | |
| Szenzor méret | 7.77 mm | |
| Felbontás | 2.3 MP | |
| FPS (intervallumok) | 51 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
a2A2448-23gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX547 CMOS | |
| Szenzor méret | 8.75 mm | |
| Felbontás | 5 MP | |
| FPS (intervallumok) | 23 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A2448-23gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX547 CMOS | |
| Szenzor méret | 8.75 mm | |
| Felbontás | 5 MP | |
| FPS (intervallumok) | 23 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
a2A2840-14gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX546 CMOS | |
| Szenzor méret | 11 mm | |
| Felbontás | 8 MP | |
| FPS (intervallumok) | 14 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A2840-14gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX546 CMOS | |
| Szenzor méret | 11 mm | |
| Felbontás | 8 MP | |
| FPS (intervallumok) | 14 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
a2A4096-9gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX545 CMOS | |
| Szenzor méret | 13.91 mm | |
| Felbontás | 12.3 MP | |
| FPS (intervallumok) | 9 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A4096-9gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX545 CMOS | |
| Szenzor méret | 13.91 mm | |
| Felbontás | 12.3 MP | |
| FPS (intervallumok) | 9 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
a2A4504-5gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX541 CMOS | |
| Szenzor méret | 17.45 mm | |
| Felbontás | 20.2 MP | |
| FPS (intervallumok) | 5 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A4504-5gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX541 CMOS | |
| Szenzor méret | 17.45 mm | |
| Felbontás | 20.2 MP | |
| FPS (intervallumok) | 5 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A5320-7gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX542 CMOS | |
| Szenzor méret | 16.78 mm | |
| Felbontás | 16.1 MP | |
| FPS (intervallumok) | 7 | |
| Színes/Monokróm | Color | |
| Foglalat | C-mount | |
|
a2A5320-7gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX542 CMOS | |
| Szenzor méret | 16.78 mm | |
| Felbontás | 16.1 MP | |
| FPS (intervallumok) | 7 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
a2A5328-4gcIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX540 CMOS | |
| Szenzor méret | 19.26 mm | |
| Felbontás | 24.4 MP | |
| FPS (intervallumok) | 4 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
a2A5328-4gmIP67| Kategória | Általános | |
| Modellcsalád | ace 2 R IP67 | |
| Interfész | GigE | |
| Szenzorgyártó | Sony | |
| Szenzor | IMX540 CMOS | |
| Szenzor méret | 19.26 mm | |
| Felbontás | 24.4 MP | |
| FPS (intervallumok) | 4 | |
| Színes/Monokróm | Mono | |
| Foglalat | C-mount | |
|
A3051CG000E| Sensor | PYTHON480 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μ+m × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed； | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3051MG000E| Sensor | PYTHON480 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3051MG100E| Sensor | PYTHON480 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3124CG100E| Sensor | AR0135 | | Image Sensor | 1/3"CMOS | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 54 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | 40.7dB | | Dynamic Range | 71.1dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 18.7μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3124MG100E| Sensor | AR0135 | | Image Sensor | 1/3"CMOS | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 54 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | 40.7dB | | Dynamic Range | 71.1dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 18.7μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3131CG000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed； | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3131MG000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | 黑白 | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3131MG100E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Decimation | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3135CG000E| Sensor | RJ33J3CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 30 fps | | Bit Depth | 14 | | Mono/Color | Color | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2 MP | | S/N Ratio | ＞38 dB | | Dynamic Range | 63 dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/Packed, BayerGB8/10/10Packed/12/Packed, YUV422Packed； | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output | | Lens Mount | C | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.4 W | | Product Dimensions | 29 mm×29 mm×42 mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3135CU000E| Sensor | RJ33J4CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 33 fps | | Bit Depth | 14 | | Mono/Color | Color | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | >38dB | | Dynamic Range | 63dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3135MG000E| Sensor | RJ33J4CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 30 fps | | Bit Depth | 14 | | Mono/Color | Mono | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2 MP | | S/N Ratio | ＞38 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output | | Lens Mount | C | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.4 W | | Product Dimensions | 29mm×29mm×42mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3135MU000E| Sensor | RJ33J4CA0DT | | Image Sensor | 1/3"CCD | | Shutter | Global | | Resolution | 1280 × 960 | | Frame Rate | 33 fps | | Bit Depth | 14 | | Mono/Color | Mono | | Pixel Size | 3.75 μm × 3.75 μm | | Pixel | 1.2MP | | S/N Ratio | >38dB | | Dynamic Range | 63dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3138CU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3MP | | S/N Ratio | 40dB | | Dynamic Range | 60dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 10μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
|
|
A3138MU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3MP | | S/N Ratio | 40dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 10μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3139CG000E| Sensor | — | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3 MP | | S/N Ratio | 40 dB | | Dynamic Range | ＞58 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.4 W | | Product Dimensions | 29 mm × 29 m × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3200CG000E| Sensor | IMX290 | | Image Sensor | 1/2.8"CMOS | | Shutter | Rolling | | Resolution | 1920 × 1080 | | Frame Rate | 22 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.9 μm × 2.9 μm | | Pixel | 2.07MP | | S/N Ratio | >38dB | | Dynamic Range | Support DOL-HDR | | Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 17.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.3W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3200CU000E| Sensor | IMX290 | | Image Sensor | 1/2.8"CMOS | | Shutter | Rolling | | Resolution | 1920 × 1080 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.9 μm × 2.9 μm | | Pixel | 2.07MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 8μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3200MG004E| Sensor | IMX290 | | Image Sensor | 1/2.8"CMOS | | Shutter | Rolling | | Resolution | 1920 × 1080 | | Frame Rate | 22 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.9 μm × 2.9 μm | | Pixel | 2.07MP | | S/N Ratio | >38dB | | Dynamic Range | Support DOL-HDR | | Image Format | Mono8 | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 17.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.3W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504CG000E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 74.3 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504CG100E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0MP | | S/N Ratio | 40dB | | Dynamic Range | 74.3dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, RGB8Packed,YUV422Packed； | | ROI | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504MG000E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 74.3 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3504MG100E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0MP | | S/N Ratio | 40dB | | Dynamic Range | 74.3dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 21.5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.8W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3600CU60E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3600MG100E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 18 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 73dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3600MG18E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 19 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 73dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.4W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3600MU60E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3A04MG10E| Sensor | MT9J003 | | Image Sensor | 1/2.3"CMOS | | Shutter | Rolling | | Resolution | 3840 × 2748 | | Frame Rate | 10 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.67 μm × 1.67 μm | | Pixel | 10.6MP | | S/N Ratio | >32dB | | Dynamic Range | 65dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈2.9W | | Product Dimensions | 29mm×29mm×42mm | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3A20CU24E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 55μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1 W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3A20MU24E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1 W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ | | Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1 W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3B00CG000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 6 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.6 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3B00CU000E| Sensor | IMX183 | | Image Sensor | 1" CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 19.66 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A3B00MG000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 6 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.3 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A3B00MU000E| Sensor | IMX183 | | Image Sensor | 1" CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 19.66 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | USB3.0 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A5051CU545E| Sensor | PYTHON 500 | | Image Sensor | 1/3.6"CMOS | | Shutter | Global | | Resolution | 800 × 600 | | Frame Rate | 545 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 0.5MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | Decimation | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.4W | | Product Dimensions | 29mm×29mm×29mm | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A5501MG20E-NIR| Sensor | PYTHON 5000 NIR | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 2592 × 2048 | | Frame Rate | 20 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 5.3 MP | | S/N Ratio | >38dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7200MG30E| Sensor | IMX249 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 38 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 14 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.0 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7230CU000E| Sensor | IMX392 | | Image Sensor | 1/2.3"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 167 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | BayerRG8/10/10Packed;BayerGB8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.9W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A7230MU000E| Sensor | IMX392 | | Image Sensor | 1/2.3"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 167 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.9W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A7500MG20E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7501CG010E| Sensor | XGS5000 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2592 × 2048 | | Frame Rate | 21 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 5.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1-32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25 μs-10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE,PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.2 W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A780AMU000E| Sensor | IMX546 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2840 × 2840 | | Frame Rate | 47 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 8MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.9W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A7A20CG9E| Sensor | IMX304 | | Image Sensor | 1.1''CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 9 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.29MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8, BayerRG8/10/10Packed,BayerGB8/10/10Packed, YUV422Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | From 0 to 4, support LUT | | Exposure Time | 48μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.2W | | Product Dimensions | 29mm×44mm×58mm (not including lens mount and rear case connector) | | Net Weight | 100 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7A20MG9E| Sensor | IMX304 | | Image Sensor | 1.1''CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 9 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.29MP | | S/N Ratio | >38dB | | Dynamic Range | 70dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | 0~4, 支持LUT | | Exposure Time | 48μS~1S | | Trigger Mode | Support Software Trigger/Hardware Trigger/Free Run Mode; | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.2W | | Product Dimensions | 29mm×44mm×58mm (not including lens mount and rear case connector) | | Net Weight | 100 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7A21MG400E| Sensor | XGS12000 | | Image Sensor | 1''CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 9 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 70dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 69μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | GigE,PoE | | GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12V≈3.2W | | Product Dimensions | 29mm×29mm×42mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
A7A2AMU000E| Sensor | IMX545 | | Image Sensor | 1/1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 31 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 1μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈4.1W | | Product Dimensions | 29mm × 29mm × 29mm (not including rear case connector) | | Net Weight | 60g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9-0828-6MP| ?? | A9-6MP?? | | ?? | A9-0828-6MP | | ???? | 8 mm | | ???? | F2.8 - 16 | | ???? | ?9.4 mm(1/1.8") | | ???? | 0.1m to infinite | | ???? | -0.0028 | | TV?? | -0.0015 | | ??? | 42.2°×50.36°×34.81° (9 mm×7.4 mm×4.9 mm) | | ???? | 80% (F2.8); 90% (F4.0) | | ?????? | 8° | | ???? | 436 nm?656 nm | | ????? | T> 85% | | ?? | 48±5 g | | ???? | C? | | ???? | M27×P0.5 | | ???? | ???? | | ???? | ???? | | ???? | 31.1×?30 mm | | ???? | -20°C?+50°C |
|
A9-0828-6MPE| Series | A9-6MP Series | | Model | A9-0828-6MPE | | Focal Length | 8 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.1 m to infinite | | Optical Distortion | -0.28% | | TV Distortion | -0.15% | | Field of View | 58.94°×50.36°×34.81° (9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 80% (F2.8); 90% (F4.0) | | CRA?Chief Ray Angle) | 8° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 30.78×?30 mm | | Net Weight | 48±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-1228-6MP| Series | A9-6MP Series | | Model | A9-1228-6MP | | Focal Length | 12 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.1 m to infinite | | Optical Distortion | 0.1% | | TV Distortion | 0.05% | | Field of View | 42.2°×34.96°×23.7° (9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 78% (F2.8); 92% (F4.0) | | CRA?Chief Ray Angle) | 7.9° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 30×?30 mm | | Net Weight | 48±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-1628-6MP| Series | A9-6MP Series | | Model | A9-1628-6MP | | Focal Length | 16 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.1 m to infinite | | Optical Distortion | 0.1% | | TV Distortion | 0.05% | | Field of View | 30.2°×24.6°×18.2°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 85% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 7.7° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 36.9×?30 mm | | Net Weight | 56±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-2528-6MPE| Series | A9-6MP Series | | Model | A9-2528-6MPE | | Focal Length | 25 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.15 m to infinite | | Optical Distortion | 0.1% | | TV Distortion | 0.05% | | Field of View | 20.98°×17.2°×11.5°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 90% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 7.8° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 33.5×?30 mm | | Net Weight | 47±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-3528-6MP| Series | A9-6MP Series | | Model | A9-3528-6MP | | Focal Length | 35 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.2 m to infinite | | Optical Distortion | -0.09% | | TV Distortion | -0.04% | | Field of View | 13.6°×11.3°×7.5°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 93% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 6.84° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 39.8×?30 mm | | Net Weight | 60±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9-5028-6MPE| Series | A9-6MP Series | | Model | A9-5028-6MPE | | Focal Length | 50 mm | | Aperture | F2.8 - 16 | | Image Sensor Size | ?9.4 mm(1/1.8") | | Focus Range | 0.25 m to infinite | | Optical Distortion | -0.12% | | TV Distortion | -0.05% | | Field of View | 9.7°×7.93°×5.29°(9 mm×7.4 mm×4.9 mm) | | Relative Illumination | 90% (F2.8); 95% (F4.0) | | CRA?Chief Ray Angle) | 5° | | Spectral Range | 436 nm~656 nm | | Spectral Transmission | T?85% | | Camera Mount | C - Mount | | Filter Thread | M27×P0.5 | | Focus Control | Manual | | Iris Control | Manual | | Product Dimensions | 48×?30 mm | | Net Weight | 67±5 g | | Operating Temperature | -20°C ~ +50°C |
|
A9507CX703E| Sensor | GMAX2505 | | Image Sensor | 6.5 mm × 5.4 mm CMOS | | Shutter | Global | | Resolution | 2592 × 2160 | | Frame Rate | 210 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 5 MP | | S/N Ratio | 36.9 dB | | Dynamic Range | 62 dB | | Image Format | BayerGB8/BayerGB10 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ~ 2×, Digital gain: 1× ~ 100× | | Exposure Time | 2 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 6.4 W | | Product Dimensions | 50 mm × 50 mm × 44.7 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9507MX703E| Sensor | GMAX2505 | | Image Sensor | 6.5 mm × 5.4 mm CMOS | | Shutter | Global | | Resolution | 2592 × 2160 | | Frame Rate | 210 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 5 MP | | S/N Ratio | 36 dB | | Dynamic Range | 62 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ～ 2×, Digital gain: 1× ～ 100× | | Exposure Time | 2 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 6.4 W | | Product Dimensions | 50 mm × 50 mm × 44.7 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9907MX703E| Sensor | GMAX2509 | | Image Sensor | 10.5 mm × 5.4 mm CMOS | | Shutter | Global | | Resolution | 4192 × 2160 | | Frame Rate | 120 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 9 MP | | S/N Ratio | 36 dB | | Dynamic Range | 62 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ～ 2×, Digital gain: 1× ～ 100× | | Exposure Time | 2 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 6.9 W | | Product Dimensions | 50 mm × 50 mm × 44.7 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9A27MX703E| Sensor | Customized | | Image Sensor | 11.27 mm × 10.24 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 85 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 12 MP | | S/N Ratio | 37.7 dB | | Dynamic Range | 66.9 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog Gain: 1× ～ 2×, Digital Gain: 1× ～ 100× | | Exposure Time | 8 μS ～ 5 S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24V ≈ 7.8W | | Product Dimensions | 50 mm × 50 mm × 44.8 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9A87MX703E| Sensor | GMAX2518 | | Image Sensor | 11.27 mm × 10.24 mm CMOS | | Shutter | Global | | Resolution | 4496 × 4096 | | Frame Rate | 64 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 18 MP | | S/N Ratio | 37.7 dB | | Dynamic Range | 66.9 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog Gain: 1× ～ 2×, Digital Gain: 1× ～ 100× | | Exposure Time | 8 μS ～ 5 S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24V ≈ 8W | | Product Dimensions | 50 mm × 50 mm × 44.8 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9B57CP050E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×72mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57CP340E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M42x1 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×65mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57CX200E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | BayerGR8/BayerGR10/BayerGR12/BayerRG8/BayerRG10/BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1× ～ 100× | | Exposure Time | 25 μs ～ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24V ≈ 13W | | Product Dimensions | 72 mm × 72 mm × 74.8 mm (Non including rear case connector) | | Net Weight | 720 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57CX250E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 25μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 12V~24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈13W | | Product Dimensions | 72 mm × 72 mm × 70 mm (not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57CX703E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 41.8 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | BayerGB8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog Gain: 1× ～ 2×, Digital Gain: 1× ～ 100× | | White Balance | Support | | Exposure Time | 25 μS ～ 5 S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24V ≈ 7.3W | | Product Dimensions | 50 mm × 50 mm × 45 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
A9B57MP050E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×72mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57MP340E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 15μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M42x1 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈19.4W | | Product Dimensions | 80mm×80mm×65mm(not including rear case connector) | | Net Weight | 890 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57MX200E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1× ～ 100× | | Exposure Time | 15 μs ～ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24V ≈ 13W | | Product Dimensions | 72 mm × 72 mm × 74.8 mm (Non including rear case connector) | | Net Weight | 720 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
A9B57MX250E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 90 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | 36dB | | Dynamic Range | 63dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 25μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface; | | Power Consumption | 24V≈13W | | Product Dimensions | 72 mm × 72 mm × 70 mm (not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
A9B57MX703E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 42 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1× ～ 2×, Digital gain: 1× ～ 100× | | Exposure Time | 25 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 8 W | | Product Dimensions | 50 mm × 50 mm × 45 mm (Non including rear case connector) | | Net Weight | 240 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
AB3138CU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 40 dB | | Dynamic Range | 60 dB | | Image Format | BayerRG8/BayerGB8/BayerRG10/BayerGB10/BayerRG10Packed/BayerGB10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 10 μs~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64 MB | | Port | USB 3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector | | Power Consumption | ≈2.8 W | | Product Dimensions | 35 mm × 35 mm × 19 mm | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3138MU000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 201 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3MP | | S/N Ratio | 40dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 10μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3600CU000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | from 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3600CU010E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | M12 | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3600MG000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 18 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6 MP | | S/N Ratio | ＞38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25μ s~1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE | | GPIO Interface | 1 × Opto-isolated input, 1 × Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC power supply by 8 pin Socket connector, with voltage range from 9V to 24V | | Power Consumption | 12V≈3.4W | | Product Dimensions | 55 mm × 55 mm × 14 mm(not including lens mount and rear case connector) | | Net Weight | 60 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AB3600MU000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.2MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | SUpport | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 11μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3A20CU000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | from 0 to 4, support LUT | | Exposure Time | 55μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB3A20MU000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 30 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12MP | | S/N Ratio | >38dB | | Dynamic Range | 66dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 55μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB5131CU000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 208 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Automatic white balance | | Gamma | from 0 to 4, support LUT | | Exposure Time | 40μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | ≈3.4W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB5131MU000E| Sensor | PYTHON 1300 | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 208 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3MP | | S/N Ratio | >38dB | | Dynamic Range | 60dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | from 0 to 4, support LUT | | Exposure Time | 40μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | FPN | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB image cache | | Port | USB3.0 | | GPIO Interface | Standard 5 pin trigger connecter: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | power supply via USB interface（conform to USB3.0 interface specification） | | Power Consumption | 12V≈3.4W | | Product Dimensions | 35mm×35mm×19mm | | Net Weight | 46 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB7160CU000E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 249 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | BayerRG8/10/10Packed;BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 19 mm (not including lens mount and rear case connector) | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB7200MU000E| Sensor | IMX174 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 164 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 19 mm (not including lens mount and rear case connector) | | Net Weight | 68 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AB7200MU102E| Sensor | IMX174 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 164 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2.3MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 31 mm (not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+40℃ |
|
AB7300CU102E| Sensor | IMX252 | | Image Sensor | 1/1.8"CMOS | | Shutter | Global | | Resolution | 2048 × 1536 | | Frame Rate | 120 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3 MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | BayerRG8/10/10Packed;BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈2.8W | | Product Dimensions | 35 mm × 35 mm × 31 mm (Not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+40℃ |
|
AB7300MU102E| Sensor | IMX252 | | Image Sensor | 1/1.8"CMOS | | Shutter | Global | | Resolution | 2048 × 1536 | | Frame Rate | 120fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3.2MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈2.8W | | Product Dimensions | 35mm × 35mm × 31mm (not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+40℃ |
|
AB7A20MU102E| Sensor | IMX304 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 23.4 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12 MP | | S/N Ratio | >38dB | | Dynamic Range | >70dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 16μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 64MB | | Port | USB 3.0 | | GPIO Interface | 5-core white plug interface: 1 optocoupler isolated input, 1 optocoupler isolated output, and 1 configurable input/output without optocoupler isolation | | Lens Mount | C | | Power Supply | 5.0V/900mA, powered through USB3.0 interface (compliant with USB3.0 interface specifications) or +5.0V/1A DC power supply auxiliary power supply (through auxiliary communication interface) | | Power Consumption | ≈3.2W | | Product Dimensions | 35 mm × 35 mm × 31 mm (Not including lens) | | Net Weight | 50g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AD-MS1N-MT
| Modellcsalád |
VS-MS Series |
| Gyártó |
VS Technology |
|
AD-MS1N-OL
| Modellcsalád |
VS-MS Series |
| Gyártó |
VS Technology |
|
AD-R01-270| Modellcsalád | AD-R01 series | |
| Gyártó | VS Technology | |
|
AD-R01-305| Modellcsalád | AD-R01 series | |
| Gyártó | VS Technology | |
|
AD-TLN30-01| Modellcsalád | AD-TLN series | |
| Gyártó | VS Technology | |
|
AD-TLN60-01| Modellcsalád | AD-TLN series | |
| Gyártó | VS Technology | |
|
AD-VCL100- Collimated illumination option
- Dedicated optional accessories for collimated lighting series.
|
AD-VCL150- Collimated illumination option
- Dedicated optional accessories for collimated lighting series.
|
AD-VCL30- Collimated illumination option
- Dedicated optional accessories for collimated lighting series.
|
AD-VCL60- Collimated illumination option
- Dedicated optional accessories for collimated lighting series.
|
AE3138CG000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 38.83 dB | | Dynamic Range | 51.9 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16.73 μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.5W | | Product Dimensions | 29 mm×29 m×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3138CG010E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.3 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3138MG000E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 38.54dB | | Dynamic Range | 51.7dB | | Image Format | Mono8/10/10Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16.73 μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.4W | | Product Dimensions | 29 mm×29 m×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3138MG010E| Sensor | SS | | Image Sensor | 1/2.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.0 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3139CG000E| Sensor | -- | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 5 MP | | S/N Ratio | 39.68 dB | | Dynamic Range | 65.1 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16 μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.4W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE3139MG000E| Sensor | -- | | Image Sensor | 1/2"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 92 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.8 μm × 4.8 μm | | Pixel | 1.3 MP | | S/N Ratio | 40.80 dB | | Dynamic Range | 53.4 dB | | Image Format | Mono8/10/10Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.4W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE3504CG000E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5 MP | | S/N Ratio | 39.68 dB | | Dynamic Range | 65.1 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 21.5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.4W | | Product Dimensions | 29 mm×29 m×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3504CG010E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 66 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3504MG000E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5 MP | | S/N Ratio | 39.89 dB | | Dynamic Range | 66.2 dB | | Image Format | Mono8/10/10Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 21.5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.4W | | Product Dimensions | 29 mm×29 m×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3504MG010E| Sensor | AR0521 | | Image Sensor | 1/2.5"CMOS | | Shutter | Rolling | | Resolution | 2592 × 1944 | | Frame Rate | 23 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.2 μm × 2.2 μm | | Pixel | 5.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.0 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3600CG000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 3072 × 2048 | | Frame Rate | 19.2 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | BayerRG8/BayerRG10/BayerRG12/BayerRG10Packed/BayerRG12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25.5 μs～2.5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.5W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30°C~+80°C | | Operating Temperature | 0°C~+50°C |
|
AE3600CG010E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 19 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | >38 dB | | Dynamic Range | 66 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25 μs～2 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
|
|
AE3600MG000E| Sensor | IMX178 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 3072 × 2048 | | Frame Rate | 19.2 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25.5 μs～2.5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.5W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30°C~+80°C | | Operating Temperature | 0°C~+50°C |
|
AE3600MG010E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3072 × 2048 | | Frame Rate | 19 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | >38dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 25 μs～2 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.0 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3A20CG000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 4024 × 3036 | | Frame Rate | 9.8 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | BayerRGB8/BayerRG10/BayerRG12/BayerRG10Packed/BayerRG12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 28.4 μs～2 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.5W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30°C~+80°C | | Operating Temperature | 0°C~+50°C |
|
AE3A20CG010E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 10 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3A20MG000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 4024 × 3036 | | Frame Rate | 9.8 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 28.4 μs～2 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.5W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30°C~+80°C | | Operating Temperature | 0°C~+50°C |
|
AE3A20MG010E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4000 × 3000 | | Frame Rate | 10 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.1 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3B00CG010E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 6 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.6 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE3B00MG010E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling | | Resolution | 5472 × 3648 | | Frame Rate | 6 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.3 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5048CG000E| Sensor | SS | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 544 | | Frame Rate | 308 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 37.5 dB | | Dynamic Range | 61.5 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed/BayerRG12/BayerRG12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 12 μs～10 s; | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.35W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5048MG000E| Sensor | SS | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 544 | | Frame Rate | 308 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 37.5 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 12 μs～10 s; | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.35W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5137CG010E| Sensor | - | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 90 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8,BayerGB8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 4, support LUT | | Exposure Time | 5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.9 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5137MG010E| Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1280 × 1024 | | Frame Rate | 90 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 1.3 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/10Packed/12/12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1 × 6 pin Hirose: 1 × Opto-isolated input, 1 × Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.2 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5168CG000E| Sensor | SS | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1088 | | Frame Rate | 77 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 37.5 dB | | Dynamic Range | 61.5 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed/BayerRG12/BayerRG12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 12 μs～10 s; | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.25W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5168MG000E| Sensor | SS | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1088 | | Frame Rate | 77 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 37.5 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 12 μs～10 s; | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.25W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5200CG010E| Sensor | IMX430 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1624 × 1240 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 2 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5200MG010E| Sensor | IMX430 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1624 × 1240 | | Frame Rate | 60 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 2 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5207CG000E| Sensor | GMAX4002 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 48 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 2.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | BayerGB8/10/10Packed/12/12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.6W | | Product Dimensions | 29 mm×29 m×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5207CG010E| Sensor | - | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 48 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 2.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8,BayerGB8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 4, support LUT | | Exposure Time | 5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.75W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5207MG000E| Sensor | GMAX4002 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 48 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 2.0 MP | | S/N Ratio | 40.27 dB | | Dynamic Range | 66.1 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.6W | | Product Dimensions | 29 mm×29 m×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5207MG010E| Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 48 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 2.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/10Packed/12/12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 5 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.2 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5208CG000E| Sensor | SS | | Image Sensor | 1/2.6" CMOS | | Shutter | Global | | Resolution | 1600 × 1200 | | Frame Rate | 62.9 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm ×3.45 μm | | Pixel | 2 MP | | S/N Ratio | 37.5 dB | | Dynamic Range | 61.5 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed/BayerRG12/BayerRG12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25 μs～10 s； | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.2W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE5208MG000E| Sensor | SS | | Image Sensor | 1/2.6" CMOS | | Shutter | Global | | Resolution | 1600 × 1200 | | Frame Rate | 62.9 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm ×3.45 μm | | Pixel | 2 MP | | S/N Ratio | 37.5 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25 μs～10 s； | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.2W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7040CG001E| Sensor | IMX297 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 540 | | Frame Rate | 123 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 39.86 dB | | Dynamic Range | 68 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s； SE:1~13.3us | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE7040MG001E| Sensor | IMX297 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 540 | | Frame Rate | 123 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 39.86 dB | | Dynamic Range | 68 dB | | Image Format | Mono8/10/10Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s；SE:1~13.3us | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE7160CG001E| Sensor | IMX296 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 65 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 39.95 dB | | Dynamic Range | 71 dB | | Image Format | BayerRG8/BayerRG10/BayerRG10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s； SE:1~13.3us | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE7160CG010E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 77 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | –30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE7160MG001E| Sensor | IMX296 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 65 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 39.95 dB | | Dynamic Range | 71 dB | | Image Format | Mono8/10/10Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s； SE:1~13.3us | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE7160MG010E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 77 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7200CG010E| Sensor | IMX249 | | Image Sensor | 1/1.2"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 38 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 5.86 μm × 5.86 μm | | Pixel | 2 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 14 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | –30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AE7230CG010E| Sensor | IMX392 | | Image Sensor | 1/2.3"CMOS | | Shutter | Global | | Resolution | 1920 × 1200 | | Frame Rate | 52 fps | | Bit Depth | 10 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 2.3 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.86 W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7300CG010E| Sensor | IMX265 | | Image Sensor | 1/1.8"CMOS | | Shutter | Global | | Resolution | 2048 × 1536 | | Frame Rate | 38 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7300MG010E| Sensor | IMX265 | | Image Sensor | 1/1.8"CMOS | | Shutter | Global | | Resolution | 2048 × 1536 | | Frame Rate | 38 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 3.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
|
|
AE7500CG000E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | BayerRG8/BayerRG10/BayerRG12/BayerRG10Packed/BayerRG12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | White Balance | Support | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7500CG010E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7500MG000| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7500MG000E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 1 μs～10 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 128MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈2.8W | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AE7500MG010E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed； | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.5 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 88 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3600CG000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 3072 × 2048 | | Frame Rate | 19.2 fps（32 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | 41.4 dB | | Dynamic Range | 71.6 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25.5 μs ~ 2.5 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.1W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3600CU000E| Shutter | Rolling/GlobalResetRealease | | Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps @3072 × 2048 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | 41.4 dB | | Dynamic Range | 71.7 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25 μs ~ 2.5 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.7W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH3600MG000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 3072 × 2048 | | Frame Rate | 19.2 fps（32 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | 41.2 dB | | Dynamic Range | 71 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25.5 μs ~ 2.5 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.0W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3600MU000E| Sensor | IMX178 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 3072 × 2048 | | Frame Rate | 60 fps @3072 × 2048 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 6.0 MP | | S/N Ratio | 41.4 dB | | Dynamic Range | 71.7 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 25 μs ~ 2.5 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH3800CG010E| Sensor | IMX678 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling | | Resolution | 3840 × 2160 | | Frame Rate | 14.5 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.0 μm × 2.0 μm | | Pixel | 8 MP | | S/N Ratio | 39.7 dB | | Dynamic Range | 66.5 dB | | Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8 | | Binning | Support | | ROI | Support | | Gain | 0～72 dB | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16 μs～1 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 V≈3.8 W | | Product Dimensions | 29 mm × 29 mm × 42 mm (not including lens mount and rear case connector) | | Net Weight | 94 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3A20CG000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4024×3036 | | Frame Rate | 9.7 fps（16 fps@Compression Mode Burst) | | Mono/Color | Color | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 40.1 dB | | Dynamic Range | 69.2 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 16 μs ~ 2 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.15W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3A20CU000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 4024 × 3036 | | Frame Rate | 31.7 fps @4024 × 3036 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 1.85 μm ×1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 38 dB | | Dynamic Range | 66 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16 μs ~ 2.5 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.6W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH3A20MG000E| Sensor | IMX226 | | Image Sensor | 1/1.7"CMOS | | Shutter | Rolling | | Resolution | 4024×3036 | | Frame Rate | 9.7 fps（16 fps@Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.85 μm × 1.85 μm | | Pixel | 12.0 MP | | S/N Ratio | 40.1 dB | | Dynamic Range | 69.3 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 16 μs ~ 2 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.15W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
|
|
AH3B00CG000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5472 × 3648 | | Frame Rate | 5.9 fps（10 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41.5 dB | | Dynamic Range | 71.5 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 43.76 μs ~ 2.5sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.2W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3B00CU000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5472 × 3648 | | Frame Rate | 19.1 fps @5472 × 3648 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41.5 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16 μs ~ 10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.9W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH3B00MG000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5472 × 3648 | | Frame Rate | 5.9 fps（10 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41 dB | | Dynamic Range | 68.3 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 43.76 μs ~ 2.5sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.1W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3B00MU000E| Sensor | IMX183 | | Image Sensor | 1"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5472 × 3648 | | Frame Rate | 19.1 fps @5472 × 3648 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.4 μm × 2.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41.5 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 16 μs ~ 10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.6W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH3B01CG000E| Sensor | AR2020 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5120 × 3840 | | Frame Rate | 5.9 fps（10 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 1.4 μm × 1.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 53μs~10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.20W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3B01CU000E| Sensor | AR2020 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5120 × 3840 | | Frame Rate | 19.6 fps @5120 × 3840 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 1.4 μm × 1.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 39 dB | | Dynamic Range | 61 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 45 μs ~ 10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.7W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 m×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH3B01MG000E| Sensor | AR2020 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5120 × 3840 | | Frame Rate | 5.9 fps（10 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.4 μm × 1.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 53μs~10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.1W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH3B01MU000E| Sensor | AR2020 | | Image Sensor | 1/1.8"CMOS | | Shutter | Rolling/GlobalResetRealease | | Resolution | 5120 × 3840 | | Frame Rate | 19.6 fps @5120 × 3840 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 1.4 μm × 1.4 μm | | Pixel | 20.0 MP | | S/N Ratio | 39 dB | | Dynamic Range | 61 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 45 μs ~ 10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.3W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 m×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5200CG000E| Sensor | IMX430 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1624 × 1240 | | Frame Rate | 60 fps（86.8 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 2.0 MP | | S/N Ratio | 43.6 dB | | Dynamic Range | 71.5 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 4 μs UE: 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.8W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH5200CU000E| Sensor | IMX430 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1624 × 1240 | | Frame Rate | 89 fps @1624 × 1240 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 2.0 MP | | S/N Ratio | 43 dB | | Dynamic Range | 73 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 4 μs UE: 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.7W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5200MG000E| Sensor | IMX430 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1624 × 1240 | | Frame Rate | 60 fps（86.8 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 2.0 MP | | S/N Ratio | 43.7 dB | | Dynamic Range | 71.5 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 4 μs UE: 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.6W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH5200MU000E| Sensor | IMX430 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 1624 × 1240 | | Frame Rate | 89 fps @1624 × 1240 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 2.0 MP | | S/N Ratio | 43 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 4 μs UE: 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.6W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5207CG000E| Pixel Size | 4.0 μm × 4.0 μm | | Sensor | GMAX4002 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 49 fps（81 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel | 2.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono 8/10/12, Bayer GB 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.35W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH5207CU000E| Sensor | GMAX4002 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 150 fps @5472 × 3648 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 4 μm × 4 μm | | Pixel | 20.0 MP | | S/N Ratio | 41 dB | | Dynamic Range | 67 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 5μs ~ 10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5207MG000E| Sensor | GMAX4002 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 49 fps（81 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4.0 μm × 4.0 μm | | Pixel | 2.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.2W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH5207MU000E| Sensor | GMAX4002 | | Image Sensor | 1/1.7"CMOS | | Shutter | Global | | Resolution | 2048 × 1200 | | Frame Rate | 150 fps @2048 × 1200 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 4 μm × 4 μm | | Pixel | 2.0 MP | | S/N Ratio | 41 dB | | Dynamic Range | 67 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 5 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.6W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5507CP000E| Image Sensor | CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 164fps | | Bit Depth | 10bit | | Mono/Color | Color | | Pixel Size | 3.4 μm × 3.4 μm | | S/N Ratio | 39.5dB | | Dynamic Range | 67.9dB | | Image Format | Bayer RG8/10/12;Bayer GB 8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Exposure Time | 1μs~15s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9-24V power supply via 6-pin Hirose interface, support PoCXP | | Power Consumption | 3.9W @12 VDC | | Product Dimensions | 29 mm × 29 mm × 42 mm (Non including rear case connector) | | Net Weight | 103g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5507MP000E| Image Sensor | CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 164fps | | Bit Depth | 10bit | | Mono/Color | Mono | | Pixel Size | 3.4 μm × 3.4 μm | | S/N Ratio | 39.3dB | | Dynamic Range | 66.9dB | | Image Format | Mono 8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Exposure Time | 1μs~15s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9-24V power supply via 6-pin Hirose interface, support PoCXP | | Power Consumption | 3.6W @12 VDC | | Product Dimensions | 29 mm × 29 mm × 42 mm (Non including rear case connector) | | Net Weight | 103g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH5508CU000E| Sensor | / | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 75 fps @2448 × 2048 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 41.76 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 19 μs～10s,Step: 1μs | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.6W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH5508MU000E| Sensor | / | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 75 fps @2448 × 2048 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 41.76 dB | | Dynamic Range | 61.5 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 19μs～10s,Step: 1μs | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.3 W（USB3.0 provide power supply） | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH5A09CG200E| Sensor | HR | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096×2460 | | Frame Rate | 11.9 fps（18 fps@Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 10.0 MP | | S/N Ratio | 43 dB | | Dynamic Range | 60 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 60 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.15W(Typ. ) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | 140 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AH5A09CU200E| Sensor | HR | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096 × 2460 | | Frame Rate | 38.4 fps @4096 × 2460 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 10 MP | | S/N Ratio | 41 dB | | Dynamic Range | 57 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 60μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.4W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | Approx 140g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH5A09MG200E| Sensor | HR | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096×2460 | | Frame Rate | 11.9 fps（18 fps@Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 10.0 MP | | S/N Ratio | 43 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 60 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.15W(Typ. ) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | 140 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AH5A09MU200E| Sensor | HR | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096 × 2460 | | Frame Rate | 38.4 fps @4096 × 2460 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 10 MP | | S/N Ratio | 41 dB | | Dynamic Range | 57 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 60μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | Approx 140g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH5A27CG000E| Sensor | GMAX3412 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096×3072 | | Frame Rate | 9.6 fps（16 fps@Compression Mode Burst) | | Mono/Color | Color | | Pixel Size | 3.4 μm × 3.4 μm | | Pixel | 12.0 MP | | S/N Ratio | 40.1 dB | | Dynamic Range | 69.2 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 6 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈3.15W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH5A27CP000E| Image Sensor | CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 94fps | | Bit Depth | 10bit | | Mono/Color | Color | | Pixel Size | 3.4 μm × 3.4 μm | | S/N Ratio | 39.5dB | | Dynamic Range | 67.9dB | | Image Format | Bayer RG8/10/12;Bayer GB 8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Exposure Time | 7μs~15s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9-24V power supply via 6-pin Hirose interface, support PoCXP | | Power Consumption | 5.4W @12 VDC | | Product Dimensions | 29 mm × 29 mm × 42 mm (Non including rear case connector) | | Net Weight | 103g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
AH5A27MG000E| Sensor | GMAX3412 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096×3072 | | Frame Rate | 9.6 fps（16 fps@Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.4 μm × 3.4 μm | | Pixel | 12.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 69 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | UE: 6 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈3.15W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH5A27MP000E| Image Sensor | CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 94fps | | Bit Depth | 10bit | | Mono/Color | Mono | | Pixel Size | 3.4 μm × 3.4 μm | | S/N Ratio | 39.5dB | | Dynamic Range | 67.9dB | | Image Format | Mono 8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Exposure Time | 7μs~15s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 9-24V power supply via 6-pin Hirose interface, support PoCXP | | Power Consumption | 5W @12 VDC | | Product Dimensions | 29 mm × 29 mm × 42 mm (Non including rear case connector) | | Net Weight | 103g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+40℃ |
|
AH5B57CG200E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 4.5 fps（7 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25.0 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | NE: 5μs~10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈3.10W(Typ. ) | | Product Dimensions | 29mm×44mm×58mm (not including lens mount and rear case connector) | | Net Weight | 140 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AH5B57CU200E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 14.7 fps @5120 × 5120 Bayer GB 8 | | Bit Depth | 12 | | Mono/Color | color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 35 dB | | Dynamic Range | 64 dB | | Image Format | Mono 8/10/12, Bayer GB 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 5μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.7W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | Approx 140g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH5B57MG200E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 4.5 fps（7 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25.0 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | NE: 5μs~10sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈3.00W(Typ. ) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | 140 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AH5B57MU200E| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 14.7 fps @5120 × 5120 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 35 dB | | Dynamic Range | 64 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | 5μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.3W (USB3.0 provide power supply) | | Product Dimensions | 29 mm×44 mm×58 mm (not including lens mount and rear case connector) | | Net Weight | Approx 140g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AH5B57MV200E| Sensor | Gpixel | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 30fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25MP | | S/N Ratio | >35dB | | Dynamic Range | >64dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | Range from 0 to 4, support LUT | | Exposure Time | 5μS~1S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512M data cache | | Port | USB 3.0 | | GPIO Interface | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation | | Lens Mount | C | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈4.85W (dual USB 3.0 interfaces provide power supply) | | Product Dimensions | 29mm×44mm×58mm (not including rear case connector) | | Net Weight | 139g | | Storage Temperature | -30°C~+80°C | | Operating Temperature | -30°C~+50°C |
|
AH7040CG000E| Sensor | IMX287 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 540 | | Frame Rate | 310 fps（319.9 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 39.7 dB | | Dynamic Range | 68.3 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.5W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7040CU000E| Sensor | IMX287 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 540 | | Frame Rate | 525 fps @720×540 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 43 dB | | Dynamic Range | 73 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.6W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7040MG000E| Sensor | IMX287 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 540 | | Frame Rate | 310 fps（319.9 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 68.2 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.4W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7040MU000E| Sensor | IMX287 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 720 × 540 | | Frame Rate | 525 fps @720 ×540 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 6.9 μm × 6.9 μm | | Pixel | 0.4 MP | | S/N Ratio | 43 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.4W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7160CG000E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 77 fps （100.5 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm ×3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 70.8 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.5W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7160CU000E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 249 fps @1440×1080 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm ×3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 43 dB | | Dynamic Range | 73 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.1W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7160MG000E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 77 fps （100.5 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm ×3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 71 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.4W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7160MU000E| Sensor | IMX273 | | Image Sensor | 1/2.9"CMOS | | Shutter | Global | | Resolution | 1440 × 1080 | | Frame Rate | 249 fps @1440 × 1080 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm ×3.45 μm | | Pixel | 1.6 MP | | S/N Ratio | 43 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.7W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7500CG000E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps（36 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 39.8 dB | | Dynamic Range | 71.1 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.5W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7500CU000E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448x2048 | | Frame Rate | 68.2 fps @2448x2048 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7500MG000E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 24 fps（36 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 71.1 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.4W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7500MU000E| Sensor | IMX264 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448x2048 | | Frame Rate | 68.2 fps @2448x2048 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 5.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈2.8W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7900CG000E| Sensor | IMX267 | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096 × 2160 | | Frame Rate | 13.7 fps（22 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 9.0 MP | | S/N Ratio | 39.8 dB | | Dynamic Range | 70.8 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.65W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7900CU000E| Sensor | IMX267 | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096 × 2160 | | Frame Rate | 41.6 fps @4096 × 2160 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 9.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 70.6 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.7W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7900MG000E| Sensor | IMX267 | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096 × 2160 | | Frame Rate | 13.7 fps（22 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 9.0 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 71 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.4W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7900MU000E| Sensor | IMX267 | | Image Sensor | 1"CMOS | | Shutter | Global | | Resolution | 4096 × 2160 | | Frame Rate | 41.6 fps @4096 × 2160 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 9.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 70.6 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7A20CG000E| Sensor | IMX304 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 9.9 fps （16 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.0 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 70.8 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.65W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7A20CU000E| Sensor | IMX304 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 30.2 fps @4096 × 3000 Bayer RG 8 | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 70.6 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.7W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7A20MG000E| Sensor | IMX304 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 9.9 fps（16 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.0 MP | | S/N Ratio | 39.9 dB | | Dynamic Range | 70.9 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.4W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7A20MU000E| Sensor | IMX304 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 30.2 fps @4096 × 3000 Mono 8 | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 70.6 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree | | ROI | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 14 μs UE: 15 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | USB 3.0 | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | Power supply via USB connector /DC power supply by Hirose connector, with voltage range from 9V to 24V | | Power Consumption | ≈3.2W(USB3.0 provide power supply) | | Product Dimensions | 29 mm×29 mm×30 mm (not including lens mount and rear case connector) | | Net Weight | Approx 85g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AH7B0ACG000E| Sensor | IMX541 | | Image Sensor | 1.2"CMOS | | Shutter | Global | | Resolution | 4504×4504 | | Frame Rate | 5.9 fps（8 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 20.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 71 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 2.4 μs UE: 28 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.60W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7B0AMG000E| Sensor | IMX541 | | Image Sensor | 1.2"CMOS | | Shutter | Global | | Resolution | 4504×4504 | | Frame Rate | 5.9 fps（8 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 20.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 71 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 2.4 μs UE: 28 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.4W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7B4ACG000E| Sensor | IMX540 | | Image Sensor | 1.2"CMOS | | Shutter | Global | | Resolution | 5328×4608 | | Frame Rate | 4.9 fps（7 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 24.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 71 dB | | Image Format | Mono 8/10/12, Bayer RG 8/10/10Packed/12/12Packed,YUV422_8_UYVY,YUV422_8,RGB8,BGR8 | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 2.4 μs UE: 28 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.50W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AH7B4AMG000E| Sensor | IMX540 | | Image Sensor | 1.2"CMOS | | Shutter | Global | | Resolution | 5328×4608 | | Frame Rate | 4.9 fps（7 fps @Compression Mode Burst) | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.74 μm × 2.74 μm | | Pixel | 24.0 MP | | S/N Ratio | 40 dB | | Dynamic Range | 71 dB | | Image Format | Mono8/10/10Packed/Mono12/Mono12Packed | | Binning | off/onebytwo/twobyone/twobytwo/onebyfour/fourbyone/twobyfour/fourbytwo/fourbyfour/ThreebyThree/onebySix/SixbyOne/SixbySix | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32X | | Gamma | From 0 to 3.99998, support LUT | | Exposure Time | SE: 1 μs ~ 2.4 μs UE: 28 μs ~ 10 sec | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support three sets of user-defined configurations | | Image Buffer | 256MB | | Port | GigE, PoE | | GPIO Interface | 1× 6 pin Hirose: 1× Opto-isolated input, 1× Opto-isolated output, 1 configurable input and output | | Lens Mount | C-mount | | Power Supply | PoE/ DC 9V~24V power supply via Hirose interface | | Power Consumption | 12 VDC≈2.40W(Typ. ) | | Product Dimensions | 29 mm×29 mm×42 mm (not including lens mount and rear case connector) | | Net Weight | 98 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
APT08-120| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT08-120C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT08-65| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT08-65C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1-110| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1-110C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1-65| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1-65C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1.5-110| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1.5-110C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1.5-65| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT1.5-65C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT2-110| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT2-110C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT2-65| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT2-65C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT4-65| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
APT4-65C| Modellcsalád | APT & VS-TC Series | |
| Gyártó | VS Technology | |
|
AX0057MX1E-000| Sensor | GMAX3405 | | Image Sensor | 2/3"CMOS | | Shutter | Global | | Resolution | 2448 × 2048 | | Frame Rate | 118 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.4 μm × 3.4 μm | | Pixel | 5 MP | | S/N Ratio | 39 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 2x, Digital gain: 1x ~ 32x | | Gamma | From 0 to 4, support LUT | | Exposure Time | 1 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 5.2 W | | Product Dimensions | 60 mm × 60 mm × 40 mm (not including rear case connector) | | Net Weight | 224 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX0127MP1E-000| Gamma | From 0 to 4, support LUT | | Sensor | GMAX3412 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 94 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.4 μm × 3.4 μm | | Pixel | 12 MP | | Dynamic Range | 59.7 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 2x, Digital gain: 1x ~ 32x | | Exposure Time | 7 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 8.2 W | | Product Dimensions | 60 mm × 60 mm × 40 mm (not including rear case connector) | | Net Weight | 239 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX0127MX2E-000| Sensor | GMAX3412 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 94 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.4 μm × 3.4 μm | | Pixel | 12 MP | | Dynamic Range | 59.7 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 2x, Digital gain: 1x ~ 32x | | Gamma | From 0 to 4, support LUT | | Exposure Time | 7 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 1× Opto-isolated input, 1× Opto-isolated output, 1× configurable input and output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 6 Hirose interface, support PoCXP | | Power Consumption | 6.6 W | | Product Dimensions | 60 mm × 60 mm × 40 mm (not including rear case connector) | | Net Weight | 239 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX0257MP2E-100| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 89 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 0.4x ~ 6.6x, Digital gain: 1x ~ 32x | | Gamma | From 0 to 4, support LUT | | Exposure Time | 2 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 7 W | | Product Dimensions | 60 mm × 60 mm × 47.5 mm (not including rear case connector) | | Net Weight | 333 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX0257MP4E-100| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 0.4x ~ 6.6x, Digital gain: 1x ~ 32x | | Gamma | From 0 to 4, support LUT | | Exposure Time | 2 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 9.8 W | | Product Dimensions | 60 mm × 60 mm × 47.5 mm (not including rear case connector) | | Net Weight | 333 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX0257MP4E-150| Sensor | GMAX0505 | | Image Sensor | 1.1"CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 150 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 36 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 0.4x ~ 6.6x, Digital gain: 1x ~ 32x | | Gamma | From 0 to 4, support LUT | | Exposure Time | 2 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 9.8 W | | Product Dimensions | 60 mm × 60 mm × 50.5 mm (not including rear case connector) | | Net Weight | 328 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX0657MP4E-150| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 71 fps | | Bit Depth | 10 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1.0x ~ 4.8x, Digital gain: 1x ~ 32x | | Gamma | From 0 to 4, support LUT | | Exposure Time | 27 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 13 W | | Product Dimensions | 60 mm × 60 mm × 50.5 mm (not including rear case connector) | | Net Weight | 328 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+40℃ |
|
AX2450CP4E-670-F| Sensor | IMX811 | | Image Sensor | 64.84 mm CMOS | | Shutter | Rolling | | Resolution | 19200 × 12800 | | Frame Rate | 12.4 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 2.81 μm × 2.81 μm | | Pixel | 245 MP | | S/N Ratio | 44.07 dB | | Dynamic Range | 71.7 dB | | Image Format | BayerRG8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Gain | Analog gain: 1x ~ 16x, Digital gain: 1x ~ 32x | | Exposure Time | 62 μs～60 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M72 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 30 W | | Product Dimensions | 100 mm × 100 mm × 89.83 mm (not including rear case connector) | | Net Weight | 900 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AX2450MP4E-670-F| Sensor | IMX811 | | Image Sensor | 64.84 mm CMOS | | Shutter | Rolling | | Resolution | 19200 × 12800 | | Frame Rate | 12.4 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 2.81 μm × 2.81 μm | | Pixel | 245 MP | | S/N Ratio | 44.07 dB | | Dynamic Range | 71.7 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Gain | Analog gain: 1x ~ 16x, Digital gain: 1x ~ 32x | | Exposure Time | 62 μs～60 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M72 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 30 W | | Product Dimensions | 100 mm × 100 mm × 89.83 mm (not including rear case connector) | | Net Weight | 900 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | -30℃～+50℃ |
|
AX5A22CX050E| Sensor | CMV12000 | | Image Sensor | 22.5 mm × 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 188 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12MP | | S/N Ratio | 41.3dB | | Dynamic Range | 60dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 50μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x configurable input and output | | Lens Mount | M58 x 0.75 | | Power Supply | DC24V power supply via 6-pin Hirose interface | | Power Consumption | 24V≈15W | | Product Dimensions | 72mm×72mm×72mm(not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
AX5A22CX060E| Port | CXP-6 | | Sensor | CMV12000 | | Image Sensor | 22.5 mm × 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 188 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12MP | | S/N Ratio | 41.3dB | | Dynamic Range | 60dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 50μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | GPIO Interface | 3x configurable input and output | | Lens Mount | F-Mount | | Power Supply | DC24V power supply via 6-pin Hirose interface | | Power Consumption | 24V≈15W | | Product Dimensions | 72mm×72mm×72mm(not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
AX5A22CX340E| Sensor | CMV12000 | | Image Sensor | 22.5 mm × 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 188 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12MP | | S/N Ratio | 41.3dB | | Dynamic Range | 60dB | | Image Format | BayerGR8 /BayerGR10 /BayerGR12 /BayerRG8 /BayerRG10 /BayerRG12/BayerGB8/BayerGB10/BayerGB12/BayerBG8/BayerBG10/BayerBG12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | White Balance | Support | | Exposure Time | 50μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x configurable input and output | | Lens Mount | M42 x 1 | | Power Supply | DC24V power supply via 6-pin Hirose interface | | Power Consumption | 24V≈15W | | Product Dimensions | 80mm×80mm×47mm(not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
AX5A22MP050E| Sensor | CMV12000 | | Image Sensor | 22.5 mm x 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 330 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12 MP | | S/N Ratio | 41.3 dB | | Dynamic Range | 60 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4x, Digital gain: 1x ~ 100x | | Exposure Time | 50 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 24 W | | Product Dimensions | 80 mm x 80 mm x 72.3 mm (Non including rear case connector) | | Net Weight | 790 g | | Storage Temperature | -30℃ ~ 80℃ | | Operating Temperature | -30℃ ~ 50℃ |
|
AX5A22MX050E| Sensor | CMV12000 | | Image Sensor | 22.5 mm × 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 188 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12MP | | S/N Ratio | 41.3dB | | Dynamic Range | 60dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 50μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x configurable input and output | | Lens Mount | M58 x 0.75 | | Power Supply | DC24V power supply via 6-pin Hirose interface | | Power Consumption | 24V≈15W | | Product Dimensions | 72mm×72mm×72mm(not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5A22MX060E| Sensor | CMV12000 | | Image Sensor | 22.5 mm × 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 188 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12MP | | S/N Ratio | 41.3dB | | Dynamic Range | 60dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 50μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x configurable input and output | | Lens Mount | F-Mount | | Power Supply | DC24V power supply via 6-pin Hirose interface | | Power Consumption | 24V≈15W | | Product Dimensions | 72mm×72mm×72mm(not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5A22MX340E| Sensor | CMV12000 | | Image Sensor | 22.5 mm × 16.9 mm CMOS | | Shutter | Global | | Resolution | 4096 × 3072 | | Frame Rate | 188 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 5.5 μm × 5.5 μm | | Pixel | 12MP | | S/N Ratio | 41.3dB | | Dynamic Range | 60dB | | Image Format | Mono8/Mono10/Mono12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1~100 | | Exposure Time | 50μS~5S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 2GB data cache | | Port | CXP-6 | | GPIO Interface | 3x configurable input and output | | Lens Mount | M42 x 1 | | Power Supply | DC24V power supply via 6-pin Hirose interface | | Power Consumption | 24V≈15W | | Product Dimensions | 80mm×80mm×47mm(not including rear case connector) | | Net Weight | 720 g | | Storage Temperature | - 30℃~+80℃ | | Operating Temperature | - 30℃~+50℃ |
|
AX5B17MP050E| Sensor | GSPRINT4521 | | Image Sensor | 23.0 mm × 18.4 mm CMOS | | Shutter | Global | | Resolution | 5120 × 4096 | | Frame Rate | 219 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 21 MP | | S/N Ratio | 44 dB | | Dynamic Range | 69 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | No Support | | Y Flip | Support | | Gain | Analog gain: 1× ~ 8×, Digital gain: 1× ~ 100× | | Exposure Time | 4 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output;1× RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoC×P | | Power Consumption | 24 V ≈ 34.56 W | | Product Dimensions | 80 mm × 80 mm × 75 mm (Non including rear case connector) | | Net Weight | 775 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5B51CT250E| Sensor | PYTHON 25K | | Image Sensor | 23.0 mm x 23.0 mm CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 43 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 25 MP | | S/N Ratio | 41 dB | | Dynamic Range | 58 dB | | Image Format | BayerRG8/10/10Packed, BayerRG8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 35 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 21.6 W | | Product Dimensions | 72 mm x 72 mm x 78.5 mm (not including rear case connector) | | Net Weight | 583 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5B51MT250E| Sensor | PYTHON 25K | | Image Sensor | 23.0 mm x 23.0 mm CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 43 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 4.5 μm × 4.5 μm | | Pixel | 25 MP | | S/N Ratio | 41 dB | | Dynamic Range | 58 dB | | Image Format | Mono8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 35 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 21.6 W | | Product Dimensions | 72 mm x 72 mm x 78.5 mm (not including rear case connector) | | Net Weight | 583 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5B57CT200E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 41 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 40 dB | | Dynamic Range | 63 dB | | Image Format | BayerRG8/10/12/10Packed/12Packed, BayerGB8/10/12/GB10Packed/GB12Packed | | Decimation | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 35 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 19.4 W | | Product Dimensions | 72 mm × 72 mm × 85.1 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5B57CT250E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 41 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 40 dB | | Dynamic Range | 63 dB | | Image Format | BayerRG8/10/12/10Packed/12Packed, BayerGB8/10/12/GB10Packed/GB12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 35 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 19.4 W | | Product Dimensions | 72 mm x 72 mm x 79 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5B57MT200E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 41 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 40 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Decimation | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 35 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | C-mount | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 19.4 W | | Product Dimensions | 72 mm × 72 mm × 85.1 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5B57MT250E| Sensor | GMAX0505 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 5120 × 5120 | | Frame Rate | 41 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 2.5 μm × 2.5 μm | | Pixel | 25 MP | | S/N Ratio | 40 dB | | Dynamic Range | 63 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 35 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 19.4 W | | Product Dimensions | 72 mm x 72 mm x 79 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5E07CG250E| Sensor | Customized | | Image Sensor | 29.0 mm x 16.0 mm CMOS | | Shutter | Global | | Resolution | 9344 × 5000 | | Frame Rate | 2.6 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, YUV422 Packed, YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512 MB | | Port | GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 interface | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via the 12-pin Hirose interface | | Power Consumption | 24 V ≈ 8.4 W | | Product Dimensions | 72 mm x 72 mm x 64.8 mm ( (not including the rear case connector) | | Net Weight | 482 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5E07CK250E| Sensor | customization | | Image Sensor | 29.9 mm × 16.0 mm CMOS | | Shutter | Global | | Resolution | 9280 × 4992 | | Frame Rate | 17.5 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50MP | | S/N Ratio | 40dB | | Dynamic Range | 66dB | | Image Format | BayerGB8 | | ROI | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~15S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512MB data storage | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24V≈6.83W | | Product Dimensions | 72mm×72mm×65mm(Non including rear case connector) | | Net Weight | 490 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5E07CT250E| Sensor | Customized | | Image Sensor | 22.4 mm × 22.4 mm | | Shutter | Global | | Resolution | 7008 × 7000 | | Frame Rate | 17.4 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | BayerRG8/BayerGB8 | | Decimation | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 20.16 W | | Product Dimensions | 72 mm × 72 mm × 80.5 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5E07CX250E| Sensor | Customize | | Image Sensor | 29.9 mm × 16.0 mm CMOS | | Shutter | Global | | Resolution | 9344 × 5000 | | Frame Rate | 44 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | BayerRG8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4.8x, Digital gain: 1x ~ 100x | | Exposure Time | 27 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output;1× RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 21.6 W | | Product Dimensions | 72 mm × 72 mm × 70 mm (Non including rear case connector) | | Net Weight | 690 g | | Storage Temperature | -30℃ ~ 80℃ | | Operating Temperature | -30℃ ~ 50℃ |
|
AX5E07MG250E| Sensor | Customized | | Image Sensor | 29.0 mm × 16.0 mm CMOS | | Shutter | Global | | Resolution | 9344 × 5000 | | Frame Rate | 2.6 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/10Packed/12/12Packed; | | Binning | 1 × 2, 2 × 1, 2 × 2 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512 MB | | Port | GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 interface | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via the 12-pin Hirose interface | | Power Consumption | 24 V ≈ 8.4 W | | Product Dimensions | 72 mm × 72 mm × 64.8 mm ( (not including the rear case connector) | | Net Weight | 482 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5E07MK250E| Sensor | customization | | Image Sensor | 29.9 mm × 16.0 mm CMOS | | Shutter | Global | | Resolution | 9280 × 4992 | | Frame Rate | 17.5 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50MP | | S/N Ratio | 40dB | | Dynamic Range | 66dB | | Image Format | Mono8 | | ROI | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 16μS~15S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 215MB data storage | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24V≈6.83W | | Product Dimensions | 72mm×72mm×65mm(Not including rear case connector) | | Net Weight | 490 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5E07MT250E| Sensor | Customized | | Image Sensor | 22.4 mm × 22.4 mm | | Shutter | Global | | Resolution | 7008 × 7000 | | Frame Rate | 17.4 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8 | | Decimation | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 20.16 W | | Product Dimensions | 72 mm × 72 mm × 80.5 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5E07MX250E| Sensor | Customize | | Image Sensor | 29.9 mm x 16.0 mm CMOS | | Shutter | Global | | Resolution | 9344 × 5000 | | Frame Rate | 44 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 50 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4.8x, Digital gain: 1x ~ 100x | | Exposure Time | 27 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 21.6 W | | Product Dimensions | 72 mm x 72 mm x 69.8 mm (Non including rear case connector) | | Net Weight | 690 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57CG250E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm x 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 1.7 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, YUV422 Packed, YUV422_8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512 MB | | Port | GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 interface | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via the 12-pin Hirose interface | | Power Consumption | 24 V ≈ 8.4 W | | Product Dimensions | 72 mm x 72 mm x 64.8 mm ( (not including the rear case connector) | | Net Weight | 482 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57CK250E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9280 × 6992 | | Frame Rate | 12.5 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65MP | | S/N Ratio | 40dB | | Dynamic Range | 66dB | | Image Format | BayerGB8BayerGB10 | | ROI | Support | | Y Flip | Support | | Gain | 1~32 | | White Balance | Support | | Gamma | The range of 0 ~ 4,support LUT | | Exposure Time | 16μS~15S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512MB data storage | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24V≈6.83W | | Product Dimensions | 72mm×72mm×65mm(Not including rear case connector) | | Net Weight | 490 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57CP050E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 71 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | BayerGB8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4.8x, Digital gain: 1x ~ 100x | | Exposure Time | 27 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 24 W | | Product Dimensions | 80 mm × 80 mm × 73.4 mm (Non including rear case connector) | | Net Weight | 790 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57CT250E| Sensor | GMAX3265 | | Image Sensor | 29.9mm × 22.4mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 17.4 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | BayerRG8, BayerGB8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 20.16 W | | Product Dimensions | 72 mm × 72 mm × 80 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5F57CX250E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 31 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | BayerRG 8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4.8x, Digital gain: 1x ~ 100x | | Exposure Time | 27 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 21.6 W | | Product Dimensions | 72 mm × 72 mm × 70 mm (Non including rear case connector) | | Net Weight | 690 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57MG250E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 1.7 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512 MB | | Port | GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 interface | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via the 12-pin Hirose interface | | Power Consumption | 24 V ≈ 8.4 W | | Product Dimensions | 72 mm × 72 mm × 64.8 mm ( (not including the rear case connector) | | Net Weight | 482 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57MK250E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9280 × 6992 | | Frame Rate | 12.5 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65MP | | S/N Ratio | 40dB | | Dynamic Range | 66dB | | Image Format | Mono8Mono10 | | ROI | Support | | Y Flip | Support | | Gain | 1~32 | | Gamma | 0 ～ 4,support LUT | | Exposure Time | 16μS~15S | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512MB data storage | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24V≈6.83W | | Product Dimensions | 72mm×72mm×65mm(Not including rear case connector) | | Net Weight | 490 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57MP050E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 71 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4.8x, Digital gain: 1x ~ 100x | | Exposure Time | 27 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 24 W | | Product Dimensions | 80 mm x 80 mm x 73.4 mm (Non including rear case connector) | | Net Weight | 790 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX5F57MT250E| Sensor | GMAX3265 | | Image Sensor | 29.9mm × 22.4mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 17.4 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 16 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output, 1× RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 20.16 W | | Product Dimensions | 72 mm × 72 mm × 80 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX5F57MX250E| Sensor | GMAX3265 | | Image Sensor | 29.9 mm × 22.4 mm CMOS | | Shutter | Global | | Resolution | 9344 × 7000 | | Frame Rate | 31 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 65 MP | | S/N Ratio | 40 dB | | Dynamic Range | 66 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 4.8x, Digital gain: 1x ~ 100x | | Exposure Time | 27 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 21.6 W | | Product Dimensions | 72 mm x 72 mm x 69.8 mm (Non including rear case connector) | | Net Weight | 690 g | | Storage Temperature | -30℃ ~ 80℃ | | Operating Temperature | -30℃ ~ 50℃ |
|
AX5K37MT250E| Sensor | GMAX32103 | | Image Sensor | 36.1 mm × 29.4 mm CMOS | | Shutter | Global | | Resolution | 11264 × 9200 | | Frame Rate | 11.25 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 103 MP | | S/N Ratio | > 40 dB | | Dynamic Range | 66.4 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 20 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1GB | | Port | 10GigE | | GPIO Interface | 3 × Opto-isolated input, 3 × Opto-isolated output, 1 × RS232 | | Lens Mount | M58 × 0.75 | | Power Supply | 24 V | | Power Consumption | 20 W | | Product Dimensions | 72 mm × 72 mm × 79 mm (not including rear case connector) | | Net Weight | 600 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX7A20CT250E| Sensor | IMX253 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 68 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12 MP | | S/N Ratio | 39 dB | | Dynamic Range | 71.6 dB | | Image Format | BayerRG8/10/10Packed, BayerGB8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 1 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 18.7 W | | Product Dimensions | 72 mm x 72 mm x 78 mm (not including rear case connector) | | Net Weight | 583 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX7A20MT250E| Sensor | IMX253 | | Image Sensor | 1.1" CMOS | | Shutter | Global | | Resolution | 4096 × 3000 | | Frame Rate | 68 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 12 MP | | S/N Ratio | 39 dB | | Dynamic Range | 71.6 dB | | Image Format | Mono8/10/10Packed | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 1 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1 GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output；1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12-pin Hirose interface | | Power Consumption | 24 V ≈ 18.7 W | | Product Dimensions | 72 mm x 72 mm x 78 mm (not including rear case connector) | | Net Weight | 583 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|
AX7C10CG250E| Sensor | IMX342 | | Image Sensor | 22.3 mm x 16.7 mm CMOS | | Shutter | Global | | Resolution | 6464 × 4852 | | Frame Rate | 3.6 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 31 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8, BayerRG8/10/10Packed/12/12Packed, BayerGB8/10/10Packed/12/12Packed, YUV422 Packed | | Binning | 1 x 2,2 x 1,2 x 2 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, support LUT | | Exposure Time | 3 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 512 MB | | Port | GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 interface | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via the 12-pin Hirose interface | | Power Consumption | 24 V ≈ 7.86 W | | Product Dimensions | 72 mm x 72 mm x 64 mm ( (not including the rear case connector) | | Net Weight | 487 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX7C10CK250E| Sensor | IMX342 | | Image Sensor | 22.3 mm x 16.7 mm CMOS | | Shutter | Global | | Resolution | 6240 × 4848 | | Frame Rate | 24.8 fps | | Bit Depth | 10 bit | | Mono/Color | Color | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 31 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | BayerRG8/10/12, BayerGB8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | 0 ~ 4, Support LUT | | Exposure Time | 3 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24 V ≈ 16.8 W | | Product Dimensions | 72 mm x 72 mm x 64.1 mm (Non including rear case connector) | | Net Weight | 500 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX7C10MG250E| Sensor | IMX342 | | Image Sensor | 22.3 mm × 16.7 mm CMOS | | Shutter | Global | | Resolution | 6464 × 4852 | | Frame Rate | 3.6 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 31 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | 1 × 2, 2 × 1, 2 × 2 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 3 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 256 MB | | Port | GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output, 1x RS232 interface | | Lens Mount | M58 × 0.75 | | Power Supply | DC 24V power supply via the 12-pin Hirose interface | | Power Consumption | 24 V ≈ 7.86 W | | Product Dimensions | 72 mm × 72 mm × 64 mm (not including the rear case connector) | | Net Weight | 487 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX7C10MK250E| Sensor | IMX342 | | Image Sensor | 22.3 mm x 16.7 mm CMOS | | Shutter | Global | | Resolution | 6240 × 4848 | | Frame Rate | 24.8 fps | | Bit Depth | 10 bit | | Mono/Color | Mono | | Pixel Size | 3.45 μm × 3.45 μm | | Pixel | 31 MP | | S/N Ratio | 40 dB | | Dynamic Range | 73 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, Support LUT | | Exposure Time | 3 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M58 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24 V ≈ 16.8 W | | Product Dimensions | 72 mm x 72 mm x 64.1 mm (Non including rear case connector) | | Net Weight | 500 g | | Storage Temperature | -30℃ ~ 80℃ | | Operating Temperature | -30℃ ~ 50℃ |
|
AX7Q00MK470E| Sensor | IMX411 | | Image Sensor | 53.4 mm x 40.0 mm CMOS | | Shutter | Rolling | | Resolution | 14160 × 10640 | | Frame Rate | 5.1 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.76 μm × 3.76 μm | | Pixel | 151 MP | | S/N Ratio | 45 dB | | Dynamic Range | 90 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Gain | 1 ~ 32 | | Gamma | 0 ~ 4, Support LUT | | Exposure Time | 3 μs ~ 15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CameraLink | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M72 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24 V ≈ 18 W | | Product Dimensions | 100 mm x 100 mm x 65.7 mm (Non including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX7Q10CX470E| Sensor | IMX411 | | Image Sensor | 53.4 mm x 40.0 mm CMOS | | Shutter | Rolling | | Resolution | 14192 × 10640 | | Frame Rate | 6.1 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.76 μm × 3.76 μm | | Pixel | 151 MP | | S/N Ratio | 45 dB | | Dynamic Range | 90 dB | | Image Format | BayerRG8/10/12, BayerBG8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 63x, Digital gain: 1x ~ 100x | | Exposure Time | 30 μs ~ 6.5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M72 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 18 W | | Product Dimensions | 100 mm x 100 mm x 65.7 mm (Non including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -10℃~+50℃ |
|
AX7Q10CX770E| X Flip | Support | | Sensor | IM×411 | | Image Sensor | IMX411 | | Shutter | Rolling | | Resolution | 14192 × 10640 | | Frame Rate | 6.2 fps | | Bit Depth | 12 bit | | Mono/Color | Color | | Pixel Size | 3.76 μm × 3.76 μm | | Pixel | 151 MP | | S/N Ratio | 45 dB | | Dynamic Range | 78 dB | | Image Format | Bayer 8/10/12 | | ROI | Support | | Y Flip | No Support | | Gain | Analog gain: 1× ~ 63×, Digital gain: 1× ~ 100× | | Exposure Time | 30 μs ~ 6.5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3× Opto-isolated input, 3× Opto-isolated output;1× RS232 | | Lens Mount | M72 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface | | Power Consumption | 24 V ≈ 51.6 W | | Product Dimensions | 110 mm × 110 mm × 90 mm (Non including rear case connector) | | Net Weight | 1k g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -10℃~+50℃ |
|
AX7Q10MX470E| Sensor | IMX411 | | Image Sensor | 53.4 mm x 40.0 mm CMOS | | Shutter | Rolling | | Resolution | 14192 × 10640 | | Frame Rate | 6.1 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.76 μm × 3.76 μm | | Pixel | 151 MP | | S/N Ratio | 45 dB | | Dynamic Range | 90 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 63x, Digital gain: 1x ~ 100x | | Exposure Time | 30 μs ~ 6.5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M72 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 18 W | | Product Dimensions | 100 mm x 100 mm x 65.7 mm (Non including rear case connector) | | Net Weight | 890 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -10℃~+50℃ |
|
AX7Q10MX770E| Sensor | IMX411 | | Image Sensor | 53.4 mm x 40.0 mm CMOS | | Shutter | Rolling | | Resolution | 14192 × 10640 | | Frame Rate | 6.2 fps | | Bit Depth | 12 bit | | Mono/Color | Mono | | Pixel Size | 3.76 μm × 3.76 μm | | Pixel | 151 MP | | S/N Ratio | 45 dB | | Dynamic Range | 78 dB | | Image Format | Mono8/10/12 | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1x ~ 63x, Digital gain: 1x ~ 100x | | Exposure Time | 30 μs ~ 5 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-6 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output;1x RS232 | | Lens Mount | M72 x 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 24 V ≈ 51.6 W | | Product Dimensions | 110 mm x 110 mm x 90.1 mm (Non including rear case connector) | | Net Weight | 1k g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -10℃~+50℃ |
|
AX7Q27CP470E| Sensor | GMAX32152 | | Image Sensor | 53.0 mm × 29.4 mm CMOS | | Shutter | Global | | Resolution | 16544 × 9200 | | Frame Rate | 16 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 152 MP | | S/N Ratio | > 39.6 dB | | Dynamic Range | 67.3 dB | | Image Format | BayerGB8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1.4x ~ 5.2x, Digital gain: 1x ~ 100x | | White Balance | Support | | Exposure Time | 19 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M72 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 20 W | | Product Dimensions | 100 mm × 100 mm × 89.4 mm (not including rear case connector) | | Net Weight | 900 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX7Q27CT470E| Sensor | GMAX32152 | | Image Sensor | 53.0 mm × 29.4 mm CMOS | | Shutter | Global | | Resolution | 16544 × 9200 | | Frame Rate | 7.76 fps | | Bit Depth | 12 | | Mono/Color | Color | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 152 MP | | S/N Ratio | > 39.6 dB | | Dynamic Range | 67.3 dB | | Image Format | BayerGB8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | White Balance | Support | | Gamma | From 0 to 4, support LUT | | Exposure Time | 38 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M72 × 0.75 | | Power Supply | 24 V | | Power Consumption | 20 W | | Product Dimensions | 100 mm × 100 mm × 99.4 mm (not including rear case connector) | | Net Weight | 990 g | | Storage Temperature | -30℃～+80℃ | | Operating Temperature | 0℃～+50℃ |
|
AX7Q27MP470E| Sensor | GMAX32152 | | Image Sensor | 53.0 mm × 29.4 mm CMOS | | Shutter | Global | | Resolution | 16544 × 9200 | | Frame Rate | 16 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 152 MP | | S/N Ratio | > 39.6 dB | | Dynamic Range | 67.3 dB | | Image Format | Mono8/10/12 | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | Analog gain: 1.4x ~ 5.2x, Digital gain: 1x ~ 100x | | Exposure Time | 19 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Port | CXP-12 | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M72 × 0.75 | | Power Supply | DC 24V power supply via 12 Hirose interface, support PoCXP | | Power Consumption | 20 W | | Product Dimensions | 100 mm × 100 mm × 89.4 mm (not including rear case connector) | | Net Weight | 900 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | -30℃~+50℃ |
|
AX7Q27MT470E| Sensor | GMAX32152 | | Image Sensor | 53.0 mm × 29.4 mm CMOS | | Shutter | Global | | Resolution | 16544 × 9200 | | Frame Rate | 7.76 fps | | Bit Depth | 12 | | Mono/Color | Mono | | Pixel Size | 3.2 μm × 3.2 μm | | Pixel | 152 MP | | S/N Ratio | > 39.6 dB | | Dynamic Range | 67.3 dB | | Image Format | Mono8/10/10Packed/12/12Packed | | Binning | Support | | ROI | Support | | X Flip | Support | | Y Flip | Support | | Gain | 1～32 | | Gamma | From 0 to 4, support LUT | | Exposure Time | 38 μs～15 s | | Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode | | SPC | Support | | User Setting | Support two sets of user-defined configurations | | Image Buffer | 1GB | | Port | 10GigE | | GPIO Interface | 3x Opto-isolated input, 3x Opto-isolated output | | Lens Mount | M72 × 0.75 | | Power Supply | 24 V | | Power Consumption | 20 W | | Product Dimensions | 100 mm × 100 mm × 99.4 mm (not including rear case connector) | | Net Weight | 990 g | | Storage Temperature | -30℃~+80℃ | | Operating Temperature | 0℃~+50℃ |
|